Saturn Bridle Range - ORDER HERE You can change the bridle part styles on the order form, if you need a different headpiece/noseband/cheeks etc.
Innovative, slender bridle design for maximum horse comfort.
Anatomically correct, curved, padded headpiece for maximum ear pressure relief, particularly important for wide ear-base ponies and cobs, also for horses who have wide Atlas (C1) Wings. who often have problems with other Headpieces sliding forwards and pinching the back of the ear.
The wide 'Over the poll' headpieces on many of the 'Anatomical' headpieces don't conform to a lot of horse's head shapes. They may give clearance at the BACK and BELOW the ears, but pinch at the top, as they are too wide for the poll space!
Others, normally the very expensive ones, have enormous padding at the poll and noseband. Padding INCREASES spot pressure, it does not remove it!
Our headpieces are the only ones that address this problem, as they are only 1" wide at the poll and the padding is the minimum to add comfort, NOT pressure!
Soft, padded, simple Cavesson noseband which hangs from the headpiece itself. This eliminates the 'Ridge' pressure and 'Base of Ear' pressure caused by noseband headpieces which run either under, or over the bridle headpiece.
The Saturn bridle, features a removable throatlash, which simply slides onto the cheekpieces.
£151.20 Inc. VAT
For a Bridle fitter in your area, please click HERE
The Saturn Bridle also features a softly padded browband which is cleverly shaped so that it lies flat across the forehead, vastly reducing side pressure at the 'Temples'.
It has press stud fastenings, making it quickly and easily removable, or changed WITHOUT the need to take the bridle off the horse. This fastening also vastly reduces the 'Bulk' of the browband loop at the rear of the headpiece, where a major nerve cluster is situated.
Buckle fastenings.
The Saturn bridle is Handmade using only the finest, butter-soft Italian Leathers.
Available in 'Mix and Match' sizes for the different parts of the bridle.You can alter specific parts of the bridle sizes in the Special Instructions section at the Checkout, i.e., please state 'PONY headpiece, cheeks, throatlash, COB noseband, browband', or similar.
We also have a Saturn 'WIDE' headpiece option (for horses who have bulbous ears, but a narrow groove between the Atlas and Atlas wing, which twists the headpiece and pushes it forwards.
The Saturn WIDE has the Poll section wider to span the gap.
Another variation is the Venus, which has a straighter Hanger angle from the headpiece to the bit. This is often useful for horses who wear a Hanging Cheek bit, Beval or Pelham, where the cheekpiece bit ring sits further forward than with a Loose Ring or D ring and for horses with a forward mouth/poll line.
If in doubt, please Contact Me.
Available in Black or Brown in Pony, Cob, Full, and X-Full size.
Hunter and Dressage Nosebands and Hunter Browbands are also an option.
How To Measure For Our Bridles
For a Bridle fitter in your area, please click HERE
The Saturn WIDE has the same ear curve and Hanger Angle as the Saturn, but is wider over the Poll.
The Venus has the same curve as the Saturn at the top of the ear, but the Hangers are straighter than those of the Saturn, for horses where the bit conection is further forward on the face.
This photo shows the Saturn Venus headpiece option with the Hunter noseband and browband.
This photo shows the Saturn headpiece option with the Hunter noseband and browband.
Saturn bridle with the Scorpio Dressage noseband.
Saturn bridle bridle on a short, wide head, in different sized parts for a perfect fit.
